COVID-19: DYK properly fitted multilayer masks can reduce particle transmission by 96%
While multilayered masks performed much better than single-layer samples, the scientists said people should also pay attention to breathability.
Properly fitted multilayer masks block 84 per cent of particles expelled by a person wearing it, while two people donning these types of masks can reduce transmission by close to 96 per cent, according to a new study. While wearing a face mask can protect people from COVID-19, scientists, including those from Georgia Institute of Technology in the US, said the type of material, tightness of fit, and the number of fabric layers used can significantly affect exposure risk to the novel coronavirus. The study, published in the journal Aerosol Science and Technology, measured the filtration efficiency of ultrasmall submicron particles passing through a variety of different materials.
"A submicron particle can stay in the air for hours and days, depending on the ventilation, so if you have a room that is not ventilated or poorly ventilated then these small particles can stay there for a very long period of time," said Nga Lee (Sally) Ng, a co-author of the study from the Georgia Institute of Technology.
Related: As COVID-19 cases see sharp rise, what type of mask should children wear?
In the research, the scientists tested 33 different commercially accessible materials, including single-layer woven fabrics such as cotton and woven polyester, blended fabrics, cellulose-based materials, and those commonly used in hospitals.
"We learned there was a lot of variability in filtration performance even in the same type of material," Ng said.
According to the scientists, commercially available materials that provide acceptable levels of submicron particle rejection while still maintaining air flow resistance similar to a surgical mask.
"These materials combine fabric fibre density, a maze-like structure, and fibre surface chemistry to effectively reject submicron particles," said Ryan Lively, another co-author of the study.
Also read: Stop believing these coronavirus myths as India experiences fast-growing COVID second wave
For homemade masks, the scientists found that the best-performing materials were the commercially available blackout drapery and sterilisation wrap widely used for packing surgical instruments.
The researchers suggested that filters such as a HEPA/MERV or vacuum bags should be avoided unless they are certified to be fibreglass-free since these often release glass fibres on their own that can be inhaled.
Loose-knitted material, batting fabric, felt, fleece, or shiny, reusable shopping bags are also to be avoided, they added.
While multilayered masks performed much better than single-layer samples, the scientists said people should also pay attention to breathability.
They emphasised that mask fit is also important since particles can easily escape through gaps at the nose or through the sides.
Based on the analysis, the scientists said properly fitted and multilayer masks reject 84 per cent of particles expelled by a wearer while the particle transmission reduced by 96 per cent when such masks were worn by two people.
"The best way to protect ourselves and others is to reduce exhaled particles at the source, and the source is our face," Ng said.
"That really gets amplified when everyone starts wearing masks," she added.
Click here for full coverage of coronavirus